I. This product is made from Polyimide film through "Doctor-blading Process" painted with FEP on single side or double sides, then cut per customer requirement. This tape can be excellent insulation material for electrical wire winding, which is molded through melting at the temperature of 350 -380°C for a couple of minutes.

    1.Technical Data

    2. Appearance: the adhesive tape is clean and smooth, without air bubble and impurities
    3. Size
        1). Length: the length of a reel of adhesive tape is no less than 300m, which consists of no more than 3 sections. 

        And the minimum length of each section is no less than 100m.
        2). Width: 6mm to 500mm±0.5mm.
        3). Thickness: we can supply tapes with different thickness according to requirement of customers. In general, the 

        tolerance allowed by GB-T is ±0.006mm.
Ⅱ. Packing, Mark, Preservation and Transportation
    1. The film will be wound up to the pipe core and provided in rolls, each roll is well packed and loaded with plastic 

    bag to be placed into dry and clean box.
    2. Specification will be marked on the packaging of products, including size, lot number, gross weight, net weight, 

    date of manufacture, name of the manufacturer. 
    3. The products should be placed in a dry and clean room upon reception. The shelf life is approximately one year. 

    The product can still be used after quality check per standard on expiration.
    Caution: avoid moisture and mechanical damage during preservation and transportation.